EasyManua.ls Logo

Lenovo ThinkServer TS440 - User Manual

Lenovo ThinkServer TS440
182 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ThinkServerTS440
UserGuide
MachineTypes:70AL,70AM,70AN,and70AQ

Table of Contents

Other manuals for Lenovo ThinkServer TS440

Questions and Answers

  • R
    Ralph SullivanAug 17, 2025
    What to do if a disc is not working correctly on Lenovo ThinkServer TS440 Server?
    • S
      Scott GutierrezAug 17, 2025
      If a disc is not working correctly on your Lenovo Server, ensure the disc is in the optical drive with the shiny side facing down. Make sure the disc surface is clean and not scratched. Check the disc or package for regional coding compatibility. Restart the disc player program and the server. Run any optical drive diagnostic programs. Reinstall the optical drive and reconnect cables. Replace the signal cable or the optical drive if necessary.
  • T
    tfloresAug 19, 2025
    How to fix ThinkServer EasyStartup DVD when it does not start?
    • J
      Joan KimAug 19, 2025
      To fix the ThinkServer EasyStartup DVD when it does not start, ensure that the server supports the ThinkServer EasyStartup program and has a bootable DVD drive. Make sure you have set the optical drive with the ThinkServer EasyStartup DVD as the first startup device. Verify if the optical drive or the disc has problems.
  • L
    Laura AlexanderAug 22, 2025
    What to do if a USB device does not work on Lenovo ThinkServer TS440?
    • J
      Joseph LevyAug 22, 2025
      If a USB device isn't working on your Lenovo Server, make sure the USB cable is securely connected directly to the server, bypassing any USB hubs. Verify that the device drivers are correctly installed and that the USB controller is enabled in the Setup Utility program. Restart the server. If the issue persists, consider replacing the USB device.
  • L
    lgreeneAug 25, 2025
    What to do if the mouse does not work on Lenovo Server?
    • O
      Omar FlemingAug 26, 2025
      If your mouse or pointing device isn't working on your Lenovo Server, ensure it's securely connected directly to the server, bypassing any USB hubs. Make sure the device is clean and free of dust. Check that the device drivers are correctly installed and the USB controller is enabled in the Setup Utility program. Restart the server. If problems continue, replace the mouse or pointing device.
  • K
    Kayla FosterAug 27, 2025
    What to do if keyboard keys do not work on Lenovo ThinkServer TS440 Server?
    • H
      Hunter JonesAug 27, 2025
      If some or all keys on your Lenovo Server keyboard aren't working, ensure the USB keyboard cable is securely connected directly to a USB connector on the server, bypassing any USB hubs. Check that no keys are stuck and that the USB controller is enabled in the Setup Utility program. Restart the server. If the issue continues, replace the keyboard.
  • D
    Devin JohnsonAug 30, 2025
    What to do if a newly installed hot-swap hard disk drive is not recognized in Lenovo Server?
    • C
      Cesar ThompsonAug 30, 2025
      If a newly installed hot-swap hard disk drive is not recognized in your Lenovo Server, ensure the drive is in the correct drive bay. Restart the server. Remove the drive, wait 45 seconds, and reinsert it, ensuring it connects to the hot-swap hard disk drive backplane. If you have any diagnostic programs, run them to test the hard disk drive. Ensure the hot-swap hard disk drive backplane is correctly seated and the cable connection is correct. Reconnect the backplane power cable and repeat the initial steps. Reconnect the backplane signal cable and repeat the initial steps.
  • M
    Madison SantiagoSep 2, 2025
    What to do if a newly installed non-hot-swap hard disk drive is not recognized in Lenovo Server?
    • E
      Erika FieldsSep 2, 2025
      If a newly installed non-hot-swap hard disk drive is not recognized in your Lenovo Server, make sure the signal cable and connector are not damaged. Ensure the drive is securely connected to the correct SATA connector on the system board and the SATA connector is enabled in the Setup Utility program, and that all cables and jumpers are correctly installed. If you have diagnostic programs, run them to test the hard disk drive. Reinstall the drive and reconnect cables. If the issue persists, replace the signal cable or the drive itself.
  • M
    Michael EstesSep 4, 2025
    What to do if the optical drive is not recognized in Lenovo Server?
    • N
      Nancy JohnsonSep 5, 2025
      If the optical drive is not recognized in your Lenovo Server, ensure that the signal cable and connector are not damaged, and the optical drive is securely connected to the correct SATA connector on the system board, with the SATA connector enabled in the Setup Utility program. Also, ensure all cables and jumpers are installed correctly and the correct device driver is installed for the optical drive. Run any available optical drive diagnostic programs. Reinstall the optical drive and reconnect cables. If the problem persists, replace the signal cable or the optical drive. A trained service technician may need to replace the system board.
  • D
    Donna FrenchSep 7, 2025
    What to do if multiple hard disk drives fail in Lenovo ThinkServer TS440 Server?
    • A
      Ann SanchezSep 7, 2025
      If multiple hard disk drives fail in your Lenovo Server, run diagnostic programs to test the hard disk drives. Ensure the cable connection is correct. Reconnect the power and signal cables. Replace the affected signal cable. For hot-swap hard disk drives, if you suspect a problem with the backplane, replace the affected backplane.
  • C
    carol56Sep 10, 2025
    Why is displayed memory less than installed physical memory in Lenovo ThinkServer TS440?
    • U
      ufosterSep 12, 2025
      If the amount of system memory displayed is less than the total capacity of the installed physical memory modules on your Lenovo Server, and you suspect a memory module problem, ensure all memory modules are the correct type supported by the server and that you have followed the memory module installation rules. Also, ensure all memory modules are seated correctly and securely, and that the system firmware is up-to-date. Run diagnostic programs to test the memory modules. Reinstall the memory modules and replace any suspect modules. A trained service technician may need to replace the system board.

Summary

Turning On and Turning Off the Server

Turning On the Server

Instructions to power on the server.

Turning Off the Server

Instructions to power off the server.

Configuring the Server

Using the Setup Utility Program

Guide to using the server's BIOS setup utility.

Using the ThinkServer EasyStartup Program

Guide to using the EasyStartup program for configuration.

Configuring RAID

Information on configuring RAID arrays.

Installing, Removing, or Replacing Hardware

Precautions

Important safety precautions before working with hardware.

Removing the Server Cover

Step-by-step instructions to remove the server chassis cover.

Installing or Removing a Non-Hot-Swap Hard Disk Drive

Steps to install or remove non-hot-swap hard drives.

Installing or Replacing a Hot-Swap Hard Disk Drive

Steps to install or replace hot-swap hard drives.

Installing or Replacing a Hot-Swap Redundant Power Supply

Steps to install or replace redundant power supplies.

Reinstalling the Server Cover and Reconnecting Cables

Instructions to reassemble the server and reconnect cables.

Troubleshooting and Diagnostics

Troubleshooting Procedure

General steps for diagnosing and resolving server issues.

Basic Troubleshooting Tables

Tables providing solutions for common server problems.

Hard Disk Drive Problems

Troubleshooting common hard disk drive issues.

Getting Information, Help, and Service

Help and Service

Information on obtaining technical support and service.

Calling for Service

Process for requesting warranty service.

Lenovo ThinkServer TS440 Specifications

General IconGeneral
ChipsetIntel C226
Memory Slots4 DIMM slots
Network InterfaceDual Gigabit Ethernet
Form FactorTower
ProcessorIntel Xeon E3-1200 v3, Intel Core i3, Intel Pentium
Storage Bays4 x 3.5" hot-swap bays
RAID SupportRAID 0, 1, 5, 10
Power Supply450W
Expansion Slots1 x PCIe 3.0 x16, 1 x PCIe 2.0 x4
Operating System SupportWindows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware vSphere

Related product manuals