Lenovo ThinkServer TS440 - Installing or Replacing a Hot-Swap Redundant Power Supply

6.Slidethenewhot-swapharddiskdriveintothedrivebayfromthefrontuntilitsnapsintoposition,
andthencompletelyclosethehandle.
CPU
MEM
PSU
1
Figure61.Installingthehot-swapharddiskdrive
7.Checkthehot-swapharddiskdrivestatusLEDstoensurethattheharddiskdriveisoperatingcorrectly.
Youmighthavetorestarttheserverforthenewlyinstalledharddiskdrivetoberecognized.See
“Hot-swapharddiskdrivestatusLEDs”onpage26.Iftheharddiskdriveisfaulty,youneedtoreinstall
orreplaceituntilitisoperatingcorrectly.
8.Closeandlockthefrontdoor.
9.Dooneofthefollowing:
•Ifyouareinstallingahot-swapharddiskdrive,savetheremovedharddiskdrivedummytrayincase
youlaterremovethehot-swapharddiskdriveandneedadummytraytocoverthedrivebay.
•Ifyouarereplacingahot-swapharddiskdriveandareinstructedtoreturntheoldhot-swaphard
diskdrive,followallpackaginginstructionsanduseanypackagingmaterialsthataresuppliedto
youforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•TocongureRAID,goto“ConguringRAID”onpage55
.
Installingorreplacingahot-swapredundantpowersupply
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiii
and“Guidelines”onpage63.
Thistopicprovidesinstructionsonhowtoinstallorreplaceahot-swapredundantpowersupply.Thistopic
appliesonlytoservermodelsthatcomewithoneortwohot-swapredundantpowersupplies.
106ThinkServerTS440UserGuide