Figure 83. Installing the power supply assembly
4. Connect the power supply assembly cables to the system board. For detailed information about the
connectors, see “System board components” on page 19.
Coin-cell battery
Your server has a special type of memory that maintains the date, time, and configuration information for
built-in features. The coin-cell battery keeps the information active when you turn off the server. The coin-cell
battery normally requires no charging or maintenance throughout its life; however, no battery lasts forever. If
the coin-cell battery fails, the date, time, and configuration information, including passwords, are lost and an
error message is displayed when you turn on the server.
• “Removing the coin-cell battery” on page 88
• “Installing the coin-cell battery” on page 88
Chapter 5. Replacing hardware 87
To Next Page
Loading...
