6.Removethetwoscrewsthatsecurethesolid-statedrive.
Figure73.Removingthescrewsthatsecurethesolid-statedrive
7.Liftthesolid-statedriveuptoremoveitfromthedriveadapter.
Figure74.Removingthesolid-statedrivefromthedriveadapter
8.Installanewsolid-statedrive.See“Installinga2.5-inchsolid-statedriveintoa3.5-inchhard-disk-drive
bay”onpage108
.
9.Ifyouareinstructedtoreturntheoldsolid-statedrive,followallpackaginginstructionsanduseany
packagingmaterialsthataresuppliedtoyouforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•ToconfigureRAID,goto“ConfiguringRAID”onpage57
.
•Tocompletethereplacement,goto“Completingthepartsreplacement”onpage163.
Installingorreplacingahot-swapharddiskdrive
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiiiand“Guidelines”onpage65.
Chapter6.Installing,removing,orreplacinghardware117
To Next Page
Loading...
