5.Removethescrewthatsecuresthepowerconversionboard.Then,slidethepowerconversionboardto
thefrontofthechassisuntilitisreleasedfromtheretentionpostsonthechassis,andthencarefully
removetheboardoutofthechassis.
Figure84.Removingthepowerconversionboard
6.Touchthestatic-protectivepackagethatcontainsthenewpowerconversionboardtoanyunpainted
surfaceontheoutsideoftheserver.Then,removethenewpowerconversionboardfromthepackage.
Note:Carefullyhandlethepowerconversionboardbyitsedges.
Chapter6.Installing,removing,orreplacinghardware131
To Next Page
Loading...
