6.Pressthetwotabsonthecoverpresenceswitchtowardeachotherandcarefullypushthecover
presenceswitchupwardatthesametimetoremoveitoutoftheframe.
Figure96.Removingthecoverpresenceswitch
7.Touchthestatic-protectivepackagethatcontainsthenewcoverpresenceswitchtoanyunpainted
surfaceontheoutsideoftheserver.Then,removethenewcoverpresenceswitchfromthepackage.
8.Insertthenewcoverpresenceswitchwiththecableintothecoverpresenceswitchframe.
Figure97.Installingthecoverpresenceswitch
Chapter6.Installing,removing,orreplacinghardware141
To Next Page
Loading...
