EasyManua.ls Logo

Lenovo ThinkSystem SE350 V2 - Page 172

Lenovo ThinkSystem SE350 V2
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FQXSFPU0005K: A mismatch between the maximum allowed UPI link speed has been detected for
one or more processors.
Severity: Error
User Action:
Complete the following steps:
1. If this is a newly installed option, ensure that matching processors are installed in the correct
processor sockets.
2. Check Lenovo Support site for an applicable service bulletin that applies to this processor error.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
FQXSFPU0006K: A power segment mismatch has been detected for one or more processors.
Severity: Error
User Action:
Complete the following steps:
1. If this is a newly installed option, ensure that matching processors are installed in the correct
processor sockets.
2. Check Lenovo Support site for an applicable service bulletin that applies to this processor error.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
FQXSFPU0007K: Processors have mismatched Internal DDR Frequency
Severity: Error
User Action:
Complete the following steps:
1. Verify that matching DIMMs are installed in the correct population sequence. Correct any
configuration issues found.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
FQXSFPU0008K: A core speed mismatch has been detected for one or more processors.
Severity: Error
User Action:
Complete the following steps:
1. Verify that matching processors are installed in the correct processor sockets. Correct any mismatch
issues found.
2. Check Lenovo Support site for an applicable service bulletin or firmware update that applies to this
processor error.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
FQXSFPU0009K: An external clock frequency mismatch has been detected for one or more
processors.
Severity: Error
User Action:
Complete the following steps:
1. Verify that the processor is a valid option that is listed as a Server Proven device for this system. If
not, remove the processor and install one listed on the Server Proven website.
168
ThinkSystem SE350 V2 Messages and Codes Reference

Related product manuals