EasyManua.ls Logo

Lenovo ThinkEdge SE350 V2 User Manual

Lenovo ThinkEdge SE350 V2
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ThinkEdge SE350 V2
User Guide
Machine Type: 7DA9, 7DBK

Table of Contents

Other manuals for Lenovo ThinkEdge SE350 V2

Question and Answer IconNeed help?

Do you have a question about the Lenovo ThinkEdge SE350 V2 and is the answer not in the manual?

Lenovo ThinkEdge SE350 V2 Specifications

General IconGeneral
ProcessorIntel Xeon D-2700 Series
MemoryUp to 512 GB DDR4
StorageUp to 2x 2.5" SATA SSD/HDD, Up to 2x M.2 NVMe SSD
Networking2x 10GbE SFP+, 2x 1GbE RJ-45
Power Supply550W AC or DC
Operating Temperature0°C to 40°C (32°F to 104°F)
Dimensions43mm x 440mm x 315mm

Summary

Chapter 1. Introduction

Features

Overview of the server's design features and technologies.

Specifications

Summary of the server's technical, mechanical, and environmental features.

Chapter 2. Server components

Front view

Controls, LEDs, and connectors on the front of the server.

System-board layout

Information about connectors and switches on the system board.

Chapter 4. Unboxing and setup

Server setup checklist

Procedures to ensure all tasks for server setup are completed.

Chapter 5. Hardware replacement procedures

Installation Guidelines

Important considerations and precautions before installing components.

Memory module replacement

Instructions for removing or installing a memory module.

Processor heat sink replacement (trained technician only)

Procedure for removing the processor heat sink, requiring trained personnel.

Chapter 6. Internal cable routing

Cable routing for the hot-swap drives

Instructions for routing cables for 15mm and 7mm 2.5-inch hot-swap drives.

Chapter 7. System configuration

Set the network connection for the Lenovo XClarity Controller

Steps to configure network connectivity for the XClarity Controller.

Update the firmware

Options and methods for updating the server's firmware.

Chapter 8. Problem determination

Troubleshooting by system LEDs

Information on system LEDs for troubleshooting server issues.

Resolving suspected power problems

Steps to diagnose and resolve issues related to server power.

Troubleshooting by symptom

Finding solutions based on identifiable symptoms.

Appendix A. Getting help and technical assistance

Gathering information needed to call Support

Information required by technicians for efficient problem resolution.

Related product manuals