Kensington lock
ThinkEdge SE350 V2 is designed to be used with various mounting options, including desktop mount and
rack mount. Depending on the mounting option, the node can stand alone in desktop mount or be installed in
an enclosure.
• For a node installed in an enclosure, there is no external lock for the server.
• For a node in desktop mount, the ThinkEdge SE350 V2 Anti-Tampering Keylock Kit—including a
Kensington lock on the outside and an internal lock mechanism with electronic switch on the inside—can
be used to secure the top cover to the node.
Figure 10. Kensington lock securing the node and top cover
• For the removal and installation of the internal lock switch with cable of this anti-tampering keylock inside
the node, see
“Keylock switch with cable replacement” on page 100.
System-board layout
The illustrations in this section provide information about the connectors and switches that are available on
the system board.
For more information about the LEDs that are available on the system board, see
“System-board LEDs” on
page 192
.
System-board connectors
The following illustration shows the internal connectors on the system board.
24
ThinkEdge SE350 V2 User Guide
To Next Page
Loading...
