LED Description
1 Network link
LED (green)
• Off: Network link is disconnected.
• On: Network link is connected.
1 Network activity
LED (green)
• Blinking: The network is connected and active.
1GbE RJ-45 connectors link LED (green) and activity LED (green)
Figure 138. LEDs of 1GbE RJ-45 connectors
LED Description
1 Network link
LED (green)
• Off: Network link is disconnected.
• On: Network link is connected.
2 Network activity
LED (green)
• Blinking: The network is connected and active.
PMB status LED
This topic provides information about the PMB status LED and corresponding action suggestions.
The following minimal configuration is required for the server to start:
• One DRAM memory module in slot 1
• One external 300W power adapter
• One 2280 NVMe M.2 drive in slot 1 on the I/O module board
• Three non-hot-swappable system fans
Figure 139. PMB status LED
Chapter 8. Problem determination 191
To Next Page
Loading...
