Chapter 1. Introduction
The ThinkEdge SE350 V2 server (Type 7DA9) is a new edge server offering. It is specifically designed to meet
the needs of edge computing, edge AI, hybrid cloud and workloads at the edge locations. ThinkEdge SE350
V2 is a rugged compact sized edge solution with a focus on smart connectivity, business security and
manageability for the harsh environment. Built for long life and dependable performance to support your
demanding IoT workloads at the Edge. Compact and rugged it is designed for the non-datacenter
environment, ideal for remote locations such as retail, manufacturing, and factory locations.
The ThinkEdge SE350 V2 1U2N/2U2N Enclosure (Type 7DBK) is designed to mount the SE350 V2 node(s) in
a rack. A single enclosure can contain up to two ThinkEdge SE350 V2 nodes.
Figure 1. ThinkEdge SE350 V2
Features
Performance, ease of use, reliability, and expansion capabilities were key considerations in the design of
ThinkEdge SE350 V2. These design features make it possible for you to customize the system hardware to
meet your needs today and provide flexible expansion capabilities for the future.
ThinkEdge SE350 V2 implements the following features and technologies:
• Features on Demand
If a Features on Demand feature is integrated in the server or in an optional device that is installed in the
server, an activation key can be purchased to activate the feature. For information about Features on
Demand, see:
https://fod.lenovo.com/lkms
• Lenovo XClarity Controller (XCC)
The Lenovo XClarity Controller is the common management controller for Lenovo ThinkEdge server
hardware. The Lenovo XClarity Controller consolidates multiple management functions in a single chip on
© Copyright Lenovo 2023 1
To Next Page
Loading...
