Lenovo ThinkEdge SE350 V2 - Install a Power Adapter

Figure 42. Removal of the power adapter, 1U2N enclosure
2U2N enclosure
Figure 43. Removal of the power adapter, 2U2N enclosure
Step 3. Disconnect the power adapter cable from the bridge cable that connects the adapter and the node.
After this task is completed
• Install a replacement unit (see
“Install a power adapter” on page 64).
• If you are instructed to return the component, follow all of the packaging instructions and use any
packaging materials for shipping that are supplied to you.
Install a power adapter
Follow instructions in this section to install power adapter(s).
64
ThinkEdge SE350 V2 User Guide