“Viewing Event Logs” section in the XCC documentation compatible with your server at https://
pubs.lenovo.com/lxcc-overview/
Troubleshooting by system LEDs
See the following sections for information on available system LEDs.
Drive LEDs
This topic provides information on the drive LEDs on the front of the server.
The following table describes the problems that are indicated by drive activity LED and drive status LED.
Figure 131. Drive LEDs
LED Description
1 Drive activity
LED (green)
Each hot-swap drive comes with an activity LED. When this LED is flashing, it indicates the drive
activity.
2 Drive status
LED (yellow)
The drive status LED indicates the following status:
• The LED is lit: the drive has failed.
• The LED is flashing slowly (once per second): the drive is being rebuilt.
• The LED is flashing rapidly (three times per second): the drive is being identified.
Front operator panel LEDs
The front operator panel of the server provides controls and LEDs.
Chapter 8. Problem determination 187
To Next Page
Loading...
