Figure 118. Installation of the top cover
After this task is completed
• If necessary, install any locking device that secures the top cover, such as a Kensington lock.
• Proceed to complete the parts replacement (see
“Complete the parts replacement” on page 161).
Demo video
https://www.youtube.com/watch?v=zHg0tcinLXo
Complete the parts replacement
Go through the checklist to complete parts replacement.
To complete the parts replacement, do the following:
1. Make sure that all components have been reassembled correctly and that no tools or loose screws are
left inside the node.
Chapter 5. Hardware replacement procedures 161
To Next Page
Loading...
