Need help?Do you have a question about the Lenovo ThinkSystem SR860 V2 and is the answer not in the manual?
General| Expansion Slots | Up to 8 PCIe 4.0 slots |
|---|---|
| RAID Support | RAID 0, 1, 5, 6, 10, 50, 60 |
| Network | Multiple 1Gb, 10Gb, or 25Gb Ethernet options |
| Power Supply | Redundant hot-swap power supplies |
| Operating System Support | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware vSphere |
| Management | Lenovo XClarity Controller (XCC) |
Summary of the features and specifications of the ThinkSystem SR860 V2 server, including dimensions, weight, and component support.
Information on available options and tools for updating the server's firmware for optimal performance and security.
Latest tips and techniques for solving server issues, provided as retain tips or service bulletins.
Procedure for turning the server on using the power button or remote requests.
Overview of controls, LEDs, and connectors on the server's front panel for identification.
Details on the front panel LCD display for system information access, errors, and status.
Identification and location of connectors on the server's system board for component connections.
Location and function of physical switches, jumpers, and buttons for server configuration and control.
Instructions for routing cables for 2.5-inch drives, including preliminary part removal.
Procedures for connecting cables to NVMe switch cards, ensuring proper routing.
Cable routing configurations for various combinations involving SAS/SATA backplanes.
Cable routing instructions for configurations with one AnyBay backplane.
Essential safety and preparation steps before installing or replacing server components.
Procedures to prevent damage from static discharge when handling sensitive components.
Steps for installing or removing 2.5-inch hot-swap drives and their associated backplanes.
Instructions for removing and installing memory modules into the server's slots.
Steps for removing and installing server power supply units, including hot-swap procedures.
Procedures for removing and installing processor and heat sink modules (PHMs).
Detailed instructions for system board replacement, requiring trained technicians.
Steps for removing and installing the server's top cover.
Procedures for removing and installing 7mm drives and their associated drive cages.
Final checklist and steps to ensure all replaced parts are correctly installed and secured.
Information on accessing and interpreting server event logs for troubleshooting.
Using LEDs on components to identify and locate failed hardware for error diagnosis.
Systematic steps to isolate and resolve server issues when errors are not clear.
Troubleshooting steps and solutions for issues related to hard disk drives and backplanes.
Guidance for diagnosing and resolving intermittent issues with server components.
Troubleshooting procedures for issues related to memory modules and PMEMs.
Steps to resolve issues when the server fails to power on or power off correctly.
Troubleshooting steps for issues related to server processors and heat sinks.
To Next Page
