CAUTION:
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is
authorized to remove the covers where the label is attached.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
Attention:
• Go over
“Installation Guidelines” on page 137 to ensure that you work safely.
• Turn off the server and peripheral devices and disconnect the power cords and all external cables (see
“Power off the server” on page 12).
• If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top cover,
or remove the server from the rack.
Procedure
Step 1. If the top cover is locked, unlock it with a screwdriver (direction
1 ).
Figure 127. Top cover locking/unlocking direction
1 Unlocking direction
2 Locking direction
Step 2. Remove the top cover from the server.
Chapter 4. Hardware replacement procedures 241
To Next Page
Loading...
