Two-NVMe-backplane combinations
Follow the instructions in this section to learn how do cable routing for combinations with two NVMe
backplanes.
Notes:
• See
“Connecting cables to the processor and memory expansion tray” on page 50 to perform the
procedure properly while connecting PCIe cables to the processor and memory expansion tray.
• See
“Connecting cables to the NVMe switch cards” on page 52 to perform the procedure properly while
connecting PCIe cables to the PCIe switch cards.
See the following sections for cable routing combinations with three AnyBay drive backplanes.
•
“Two backplanes” on page 71
• “Three backplanes” on page 72
70
ThinkSystem SR860 V2 Maintenance Manual
To Next Page
Loading...
