About this task
Attention:
• Go over
“Installation Guidelines” on page 137 to ensure that you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Procedure
Step 1. Install the OCP Ethernet adapter.
Figure 75. Installing the OCP Ethernet adapter
Slide the adapter into the PCIe slot.
Tighten the captive screw to secure the adapter.
After this task is completed
Proceed to complete the parts replacement (see “Complete the parts replacement” on page 282).
Demo video
Watch the procedure on YouTube
PCIe riser assembly and adapter replacement
Follow instructions in this section to remove or install the PCIe riser assembly and the adapters.
Remove the PCIe riser assembly
Follow instructions in this section to remove the PCIe riser assembly.
186 ThinkSystem SR860 V2 Maintenance Manual
To Next Page
Loading...
