5. Make sure that the video output is not affected by corrupted server firmware; see “Firmware updates”
on page 7
.
6. If the problem remains, contact Lenovo Support.
Screen goes blank when you start some application programs
1. Make sure that:
• The application program is not setting a display mode that is higher than the capability of the monitor.
• You installed the necessary device drivers for the application.
The monitor has screen jitter, or the screen image is wavy, unreadable, rolling, or distorted.
1. If the monitor self-tests show that the monitor is working correctly, consider the location of the monitor.
Magnetic fields around other devices (such as transformers, appliances, fluorescents, and other
monitors) can cause screen jitter or wavy, unreadable, rolling, or distorted screen images. If this
happens, turn off the monitor.
Attention: Moving a color monitor while it is turned on might cause screen discoloration.
Move the device and the monitor at least 305 mm (12 in.) apart, and turn on the monitor.
Notes:
a. To prevent diskette drive read/write errors, make sure that the distance between the monitor and any
external diskette drive is at least 76 mm (3 in.).
b. Non-Lenovo monitor cables might cause unpredictable problems.
2. Reseat the monitor cable.
3. Replace the components listed in step 2 one at a time, in the order shown, restarting the server each
time:
a. Monitor cable
b. Video adapter (if one is installed)
c. Monitor
d. (Trained technician only) System board.
The wrong characters appear on the screen
Complete the following steps until the problem is solved:
1. Verify that the language and locality settings are correct for the keyboard and operating system.
2. If the wrong language is displayed, update the server firmware to the latest level. See
“Firmware
updates” on page 7
.
Management controller remote presence cannot work
The management controller remote presence function is unable to display the system screen when an
optional video adapter is present. To use the management controller remote presence function, remove the
optional video adapter or use the onboard VGA as the display device.
Network problems
See this section to resolve issues related to networking.
•
“Could not log in using LDAP account with SSL enabled” on page 306
• “Network connection is lost or with degraded performance” on page 306
• “Network settings can not be changed” on page 306
Chapter 5. Problem determination 305
To Next Page
Loading...
