Figure 128. Removing the top cover
Press and hold on the blue tab on the cover release latch.
Rotate the end of the latch up until it is in vertical position.
Lift the top cover to remove it.
After this task is completed
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Install the top cover
Follow instructions in this section to install the server top cover.
About this task
S014
CAUTION:
242 ThinkSystem SR860 V2 Maintenance Manual
To Next Page
Loading...
