• FQXSPSE4039I: Temporary user account [arg1] is created by inband tool.
Temporary user account create
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0228
User Action:
Information only; no action is required.
• FQXSPSE4040I: Temporary user account [arg1] expires.
Temporary user account expire
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0229
User Action:
The user account you input has expired.
• FQXSPSE4041I: Security: Userid: [arg1] had [arg2] login failures from a SFTP client at IP address
[arg3].
This message is for the use case where a user has failed to log in to a Management Controller from SFTP.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Remote Login
SNMP Trap ID: 30
CIM Prefix: IMM CIM ID: 0230
User Action:
Information only; no action is required.
• FQXSPSE4042I: The third-party password function [arg1].
This message is for the use case where a user successfully switch the third-party password function.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0238
User Action:
Information only; no action is required.
• FQXSPSE4043I: Retrieving the third-party password [arg1].
Chapter 2. XClarity Controller events 121
To Next Page
Loading...
