SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0521
User Action:
Information only; no action is required.
• FQXSPEM4000I: The [arg1] on system [arg2] cleared by user [arg3].
This message is for the use case where a Management Controller Event Log on a system is cleared by a
user.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0020
User Action:
Information only; no action is required.
• FQXSPEM4001I: The [arg1] on system [arg2] is 75% full.
This message is for the use case where a Management Controller Event Log on a system is 75% full.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Event Log Fullness
SNMP Trap ID: 35
CIM Prefix: IMM CIM ID: 0037
User Action:
Information only; no action is required.
• FQXSPEM4002I: The [arg1] on system [arg2] is 100% full.
This message is for the use case where a Management Controller Event Log on a system is 100% full.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Event Log Fullness
SNMP Trap ID: 35
CIM Prefix: IMM CIM ID: 0038
User Action:
To avoid losing older log entries, save the log as a text file and clear the log.
• FQXSPEM4003I: LED [arg1] state changed to [arg2] by [arg3].
A user has modified the state of an LED
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0071
36
ThinkSystem SN550 V2 Messages and Codes Reference
To Next Page
Loading...
