Table 2. Events organized by severity (continued)
Event ID
Message String Severity
FQXSPSD2003I Hot spare disabled for [ComputerSystemElementName]. Informational
FQXSPSD2005I Critical Array [ComputerSystemElementName] has deasserted. Informational
FQXSPSD2006I Array in system [ComputerSystemElementName] has been restored. Informational
FQXSPSD2007I Rebuild completed for Array in system
[ComputerSystemElementName].
Informational
FQXSPSD2008I Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has recovered
from a fault.
Informational
FQXSPSD2010I Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has been
removed.
Informational
FQXSPSD2011I Failure no longer Predicted on drive [arg1] in the enclosure/chassis
(MTM-S/N: [arg2]).
Informational
FQXSPSD2012I Hot Spare disabled for drive [arg1] in the enclosure/chassis (MTM-SN:
[arg2]).
Informational
FQXSPSD2013I Array critical deasserted on drive [arg1] in the enclosure/chassis
(MTM-S/N: [arg2]).
Informational
FQXSPSD2014I Array restored on drive [arg1] in the enclosure/chassis (MTM-S/N:
[arg2]).
Informational
FQXSPSD2015I Array rebuild completed on drive [arg1] in the enclosure/chassis
(MTM-S/N: [arg2]).
Informational
FQXSPSE2000I The Chassis [PhysicalPackageElementName] was closed. Informational
FQXSPSE4001I Remote Login Successful. Login ID: [arg1] using [arg2] from [arg3] at
IP address [arg4].
Informational
FQXSPSE4002I Security: Userid: [arg1] using [arg2] had [arg3] login failures from WEB
client at IP address [arg4].
Informational
FQXSPSE4003I Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3]. Informational
FQXSPSE4004I Remote access attempt failed. Invalid userid or password received.
Userid is [arg1] from WEB browser at IP address [arg2].
Informational
FQXSPSE4005I Remote access attempt failed. Invalid userid or password received.
Userid is [arg1] from TELNET client at IP address [arg2].
Informational
FQXSPSE4007I Security: Userid: [arg1] using [arg2] had [arg3] login failures from an
SSH client at IP address [arg4].
Informational
FQXSPSE4008I SNMPv1 [arg1] set by user [arg2]: Name=[arg3], AccessType=[arg4],
Address=[arg5], .
Informational
FQXSPSE4009I LDAP Server configuration set by user [arg1]: SelectionMethod=
[arg2], DomainName=[arg3], Server1=[arg4], Server2=[arg5], Server3=
[arg6], Server4=[arg7].
Informational
FQXSPSE4010I LDAP set by user [arg1]: RootDN=[arg2], UIDSearchAttribute=[arg3],
BindingMethod=[arg4], EnhancedRBS=[arg5], TargetName=[arg6],
GroupFilter=[arg7], GroupAttribute=[arg8], LoginAttribute=[arg9].
Informational
FQXSPSE4011I Secure Web services (HTTPS) [arg1] by user [arg2]. Informational
FQXSPSE4012I Secure CIM/XML(HTTPS) [arg1] by user [arg2]. Informational
18 ThinkSystem SR250 V3 Messages and Codes Reference
To Next Page
Loading...
