Table 2. Events organized by severity (continued)
Event ID
Message String Severity
FQXSPCA0017M Sensor [SensorElementName] has transitioned to critical from a less
severe state.
Error
FQXSPCA0019N Sensor [SensorElementName] has transitioned to non-recoverable
from a less severe state.
Error
FQXSPEA0002M Sensor [SensorElementName] has transitioned to critical from a less
severe state.
Error
FQXSPFW0000N The System [ComputerSystemElementName] encountered a POST
Error.
Error
FQXSPFW0002N The System [ComputerSystemElementName] encountered a firmware
hang.
Error
FQXSPIO0001L The connector [PhysicalConnectorElementName] has encountered a
configuration error.
Error
FQXSPIO0003N
A diagnostic interrupt has occurred on system
[ComputerSystemElementName].
Error
FQXSPIO0004L A bus timeout has occurred on bus [SensorElementName].
Error
FQXSPIO0006N A software NMI has occurred on system
[ComputerSystemElementName].
Error
FQXSPIO0007N A PCI PERR has occurred on system
[ComputerSystemElementName].
Error
FQXSPIO0008N A PCI SERR has occurred on system
[ComputerSystemElementName].
Error
FQXSPIO0011N An Uncorrectable Error has occurred on [SensorElementName].
Error
FQXSPIO0013N A Fatal Bus Error has occurred on bus [SensorElementName].
Error
FQXSPIO0015M Fault in slot [PhysicalConnectorSystemElementName] on system
[ComputerSystemElementName].
Error
FQXSPMA0002N Configuration Error for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
Error
FQXSPMA0007L Scrub Failure for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
Error
FQXSPMA0008N Uncorrectable error detected for [PhysicalMemoryElementName] on
Subsystem [MemoryElementName].
Error
FQXSPMA0012M An Over-Temperature Condition has been detected on the
[PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
Error
FQXSPOS4002I Watchdog [arg1] Failed to Capture Screen. Error
FQXSPOS4003I Platform Watchdog Timer expired for [arg1].
Error
FQXSPOS4010I OS Crash Video Capture Failed. Error
FQXSPPU0001N An Over-Temperature Condition has been detected on
[ProcessorElementName].
Error
FQXSPPU0003N [ProcessorElementName] has Failed with IERR. Error
FQXSPPU0004M [ProcessorElementName] has Failed with FRB1/BIST condition.
Error
24 ThinkSystem SR250 V3 Messages and Codes Reference