FIO modules For server models with
Figure 11. FIO module type 3 +
external LCD cable
• 4 x 3.5'' front drive bays
Figure 12. FIO module type 4 +
integrated diagnostics panel
• 8 x 2.5'' front drive bays
• 16 EDSFF front drive bays
System-board-assembly layout
The illustrations in this section provide information about the layout, connectors and switches that are
available on the system board assembly.
The following illustration shows the layout of the system board assembly which contains the Firmware and
RoT security module, system I/O board, and processor board.
Chapter 2. Server components 35
To Next Page
Loading...
