User Action:
Information only; no action is required.
• FQXSFPU4061I: Restored default locking behavior of AHCI-attached SATA drives.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4080I: Host Power-On password has been changed.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4081I: Host Power-On password has been cleared.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4082I: Host Admin password has been changed.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4083I: Host Admin password has been cleared.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4084I: Host boot order has been changed.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4085I: Host WOL boot order has been changed.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPW0001L: CMOS has been cleared.
Severity: Warning
User Action:
Complete the following steps:
1. If the CMOS clear was user initiated this event can be safely ignored and no further action is required.
2. If the system was recently installed, moved, or serviced, make sure the battery is properly seated.
Chapter 3. UEFI events 173
To Next Page
Loading...
