Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0223
User Action:
Information only; no action is required.
• FQXSPEM4032I: Acoustic Mode [arg1] has been engaged. Fan speed limits are in place.
This message is for the use case where Acoustic Mode is engaged.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0259
User Action:
Information only; no action is required.
• FQXSPEM4033I: Acoustic Mode [arg1] has been disengaged to allow adequate cooling.
This message is for the use case where Acoustic Mode is disengaged.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0260
User Action:
Information only; no action is required.
• FQXSPFC4000I: The bare metal connection process has been started.
Bare Metal Connection process has been started
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0143
User Action:
Information only; no action is required.
• FQXSPFC4001I: The bare metal update application reports a status of [arg1].
Bare Metal Update Application Status
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
Chapter 2. XClarity Controller events 43
To Next Page
Loading...
