QLogic QL41134 PCIe 10Gb 4-Port Base-T Ethernet Adapter 4XC7A08225 B31G 3 1, 2, 3
PCIe Full Height adapters - 10 Gb Ethernet
Emulex OCe14104B-NX PCIe 10Gb 4-Port SFP+ Ethernet Adapter 7ZT7A00493 AUKN 3 / 5* 1, 2, 3, 5, 6
PCIe Low Profile adapters - 25 Gb Ethernet
Broadcom 57412 10/25GbE SFP28 1-Port PCIe Ethernet Adapter 7ZT7A00505 AUKS 4 / 6* 1, 2, 3, 4, 5, 6
Intel XXV710-DA2 10/25GbE SFP28 2-Port PCIe Ethernet Adapter 7XC7A05523 B0WY 4 / 6* 1, 2, 3, 4, 5, 6
Mellanox ConnectX-4 Lx 10/25GbE SFP28 2-Port PCIe Ethernet Adapter 01GR250 AUAJ 4 / 6* 1, 2, 3, 4, 5, 6
QLogic QL41262 10/25GbE SFP28 2-Port PCIe Ethernet Adapter 4XC7A08228 B21R 4 / 6* 1, 2, 3, 4, 5, 6
PCIe Low Profile adapters - 40 Gb Ethernet
Mellanox ConnectX-4 Lx 1x40GbE QSFP+ Adapter 00MM950 ATRN 4 / 6* 1, 2, 3, 4, 5, 6
Mellanox ConnectX-5 Ex 25/40GbE 2-port Low-Latency Adapter 4XC7A08229 B31C 1 / 3*^ 1, 5, 6
PCIe Low Profile adapters - FDR InfiniBand
Mellanox ConnectX-4 PCIe FDR 1-Port QSFP VPI Adapter 7XC7A05524 B0WX 4 / 6* 1, 2, 3, 4, 5, 6
Mellanox ConnectX-4 PCIe FDR 2-Port QSFP VPI Adapter 7ZT7A00500 AUVG 4 / 6* 1, 2, 3, 4, 5, 6
PCIe x16 Low Profile adapters - 100 Gb Ethernet / EDR InfiniBand
Mellanox ConnectX-4 1x100GbE/EDR IB QSFP28 VPI Adapter 00KH924 ASWQ 1 / 3* 1, 5, 6
Mellanox ConnectX-4 2x100GbE/EDR IB QSFP28 VPI Adapter 00MM960 ATRP 1 / 3* 1, 5, 6
PCIe Low Profile adapters - Omni-Path
Intel OPA 100 Series Single-port PCIe 3.0 x8 HFA 00WE023 AU0A 4 / 6* 1, 2, 3, 4, 5, 6
Intel OPA 100 Series Single-port PCIe 3.0 x16 HFA 00WE027 AU0B 1 / 3* 1, 5, 6
Description
Part
number
Feature
code
Max
qty#
I/O slots
supported
# The maximum quantity shown is with one processor / two processors (this does not apply to LOM cards and ML2 adapters).
* The adapter comes without transceivers or cables; for ordering transceivers or cables, see the configuration notes below the table.
^ The 25 GbE connectivity requires the optional Mellanox QSA 100G to 25G Cable Adapter (4G17A10853) (one per port); the supported
cables include 25 GbE passive DAC and active optical cables (25 GbE transceivers not supported) (see Transceivers and cables for 25
GbE SFP28 adapters for details).
Configuration notes:
ML2 network adapters are supported in the ML2 x8 slot 3 supplied by the x8/x8/x8ML2 Riser Card 1
(7XH7A02680).
PCIe full-height network adapters are supported in the full-height PCIe x8 and x16 slots supplied by the
riser cards 1 and 2.
PCIe x16 Low Profile network adapters are supported in the full-height PCIe x16 slots supplied by the
riser cards 1 and 2.
PCIe x8 or x4 Low Profile network adapters are supported in the low profile PCIe x8 slot 4 on the system
board and full-height PCIe x8 and x16 slots supplied by the riser cards 1 and 2.
Supported transceivers or DAC cables should be purchased for the SFP+, SFP28, QSFP+, and QSFP28
adapters, and UTP Category 6 or Category 5e cables should be purchased for the 10 GbE (Cat6) or 1
GbE (Cat5e or Cat6) RJ-45 adapters. The maximum number of transceivers or cables that are supported per
adapter equals the quantity of the adapter ports, and all adapter ports must have the same type of the
transceiver or cable selected.
To Next Page
Loading...
