Table 2. Events organized by severity (continued)
Event ID
Message String Severity
FQXSPSS4000I Management Controller Test Alert Generated by [arg1]. Informational
FQXSPSS4001I Server General Settings set by user [arg1]: Name=[arg2], Contact=
[arg3], Location=[arg4], Room=[arg5], RackID=[arg6], Rack U-
position=[arg7], Address=[arg8].
Informational
FQXSPSS4002I License key for [arg1] added by user [arg2]. Informational
FQXSPSS4003I License key for [arg1] removed by user [arg2]. Informational
FQXSPSS4004I Test Call Home Generated by user [arg1]. Informational
FQXSPSS4005I Manual Call Home by user [arg1]: [arg2]. Informational
FQXSPSS4006I Call Home to [arg1] failed to complete: [arg2]. Informational
FQXSPSS4007I The BMC functionality tier is changed from [arg1] to [arg2]. Informational
FQXSPSS4008I The [arg1] setting has been changed to [arg2] by user [arg3]. Informational
FQXSPSS4009I System enters LXPM maintenance mode. Informational
FQXSPSS4010I Test Audit Log generated by user [arg1]. Informational
FQXSPSS4011I Fan speed boost setting is changed from [arg1] to [arg2]. Informational
FQXSPTR4000I Management Controller [arg1] clock has been set from NTP server
[arg2].
Informational
FQXSPTR4001I Date and Time set by user [arg1]: Date=[arg2], Time-[arg3], DST Auto-
adjust=[arg4], Timezone=[arg5].
Informational
FQXSPTR4002I Synchronize time setting by user [arg1]: Mode=Sync with NTP Server,
NTPServerHost1=[arg2]:[arg3],NTPServerHost2=[arg4]:[arg5],
NTPServerHost3=[arg6]:[arg7],NTPServerHost4=[arg8]:[arg9],
NTPUpdateFrequency=[arg10].
Informational
FQXSPTR4003I Synchronize time setting by user [arg1]: Mode=Sync with server
clock.
Informational
FQXSPUN0017I Sensor [SensorElementName] has transitioned to normal state. Informational
FQXSPUN0026I Device [LogicalDeviceElementName] has been added. Informational
FQXSPUN2009I Sensor [SensorElementName] has deasserted. Informational
FQXSPUN2012I Sensor [SensorElementName] has deasserted. Informational
FQXSPUN2018I Sensor [SensorElementName] has deasserted the transition from
normal to non-critical state.
Informational
FQXSPUN2019I Sensor [SensorElementName] has transitioned to a less severe state
from critical.
Informational
FQXSPUN2023I Sensor [SensorElementName] has deasserted the transition to non-
recoverable.
Informational
FQXSPUN2049I The RAID controller in PCI slot [arg1] is no longer in warning status. Informational
FQXSPUN2058I The remaining life for all SSDs is above threshold [arg1]. Informational
FQXSPUP0002I A firmware or software change occurred on system
[ComputerSystemElementName].
Informational
FQXSPUP4001I Flash of [arg1] from [arg2] succeeded for user [arg3] . Informational
Chapter 2. XClarity Controller events 23
To Next Page
Loading...
