Service Action:
Information only; no action is required.
• FQXSPPW2002I: [PowerSupplyElementName] has returned to OK status.
This message is for the use case when an implementation has detected a Power Supply return to normal
operational status.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Power
SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0087
User Action:
Information only; no action is required
Service Action:
Information only; no action is required.
• FQXSPPW2003I: Failure no longer predicted on [PowerSupplyElementName].
This message is for the use case when an implementation has detected a Power Supply failure is no
longer predicted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0089
User Action:
Information only; no action is required
Service Action:
Information only; no action is required.
• FQXSPPW2005I: [PowerSupplyElementName] has returned to a Normal Input State.
This message is for the use case when an implementation has detected a Power Supply that has input
that has returned to normal.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0099
User Action:
Information only; no action is required
Chapter 2. XClarity Controller events 129
To Next Page
Loading...
