Service Action:
Information only; no action is required.
• FQXSPSE4024I: SSH Client key imported for user [arg1] from [arg2].
User imported an SSH Client key
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0107
User Action:
Information only; no action is required.
Service Action:
Information only; no action is required.
• FQXSPSE4025I: SSH Client key removed from user [arg1].
User removed an SSH Client key
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0108
User Action:
Information only; no action is required.
Service Action:
Information only; no action is required.
• FQXSPSE4026I: Security: Userid: [arg1] had [arg2] login failures from a CIM client at IP address
[arg3].
This message is for the use case where a user has failed to log in to a Management Controller from CIM.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Remote Login
SNMP Trap ID: 30
CIM Prefix: IMM CIM ID: 0140
User Action:
Information only; no action is required.
Chapter 2. XClarity Controller events 155
To Next Page
Loading...
