•  FQXSFPU4058I: Secure Boot Setting is changed from enabled to disabled 
Severity: Warning
User Action:
Information only; no action is required. 
Service Action:
Information only; no action is required. 
•  FQXSFPU4059I: User requested to skip freezing lock of AHCI-attached SATA drives. System UEFI 
accepted the request and will execute priot to OS boot. 
Severity: Info
User Action:
Complete the following steps:  
1.  Change SystemOobCustom.SkipAhciFreezeLock from Disable to Enable using OneCLI tool.
2.  Reboot the system into OS.
Service Action:
Information only; no action is required. 
•  FQXSFPU4060I: Skipped freezing lock of AHCI-attached SATA drives. 
Severity: Info
User Action:
Information only; no action is required. 
Service Action:
Information only; no action is required. 
•  FQXSFPU4061I: Restored default locking behavior of AHCI-attached SATA drives. 
Severity: Info
User Action:
Information only; no action is required. 
Service Action:
Information only; no action is required. 
•  FQXSFPU4080I: Host Power-On password has been changed. 
Severity: Info
User Action:
Information only; no action is required. 
Chapter 3. UEFI events 235