Lenovo ThinkSystem SR850 V2 - Page 252

4. Ensure good physical connection between the disk drives and RAID adapter.
5. Ensure the platform and RAID config is identical to original configuration.
6. Reboot the machine and retry the import of the RAID configuration.
7. If the problem persists, please contact technical support.
Service Action:
1. Review PD Steps.
2. Verify as-build configuration
3. If RAID card is valid, replace the system board.
4. If problem persists, escalate to next level of support.
• FQXPMCL0008I: Export uefi settings successfully.
Severity: Info
User Action:
Information only; no action is required.
Service Action:
n/a
• FQXPMCL0008K: Failed to export uefi settings.
Severity: Warning
User Action:
1. Ensure proper connection to USB/network drive and retry to export uEFI setting.
2. Reboot and try the uEFI setting export again.
3. Reflash UEFI firmware.
4. If the problem persists, please contact technical support.
Service Action:
1. Review PD Steps.
2. If problem persists, escalate to next level of support
• FQXPMCL0009I: Import uefi settings successfully.
Severity: Info
User Action:
Information only; no action is required.
Service Action:
n/a
• FQXPMCL0009K: Failed to import uefi settings.
Severity: Warning
248
ThinkSystem SR850 V2 System Events Service Guide