Chapter 1. Introduction
When attempting to resolve issues with your server, the best practice is to begin with the event log of the
application that is managing the server:
• If you are managing the server from the Lenovo XClarity Administrator, begin with the Lenovo XClarity
Administrator event log.
• If you are using some other management application, begin with the Lenovo XClarity Controller event log.
The event log contains server hardware events that are recorded by the Lenovo XClarity Controller or by
UEFI. In addition, events can be generated when you perform diagnostic testing on hard drives or memory
through the Lenovo XClarity Provisioning Manager V3 (although these events are not stored in the event log).
Follow the instructions in this section to view the events that can be generated by Lenovo XClarity Controller,
UEFI, or the Lenovo XClarity Provisioning Manager V3. For each event, a user action is available to help you
understand what must be done to resolve the issue.
© Copyright Lenovo 2020, 2021 1
To Next Page
Loading...
