EasyManua.ls Logo

Lenovo ThinkSystem SR950 V3 - Page 64

Lenovo ThinkSystem SR950 V3
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Automatically notify Support: No
Alert Category: Critical - Memory
SNMP Trap ID: 41
CIM Prefix: PLAT CIM ID: 0137
User Action:
Information only; no action is required
FQXSPMA2010I: [PhysicalMemoryElementName] on Subsystem [MemoryElementName] is no
longer Throttled.
This message is for the use case when an implementation has detected Memory is no longer Throttled.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0143
User Action:
Information only; no action is required
FQXSPMA2012I: An Over-Temperature Condition has been removed on the
[PhysicalMemoryElementName] on Subsystem [MemoryElementName].
This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Removed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Temperature
SNMP Trap ID: 0
CIM Prefix: PLAT CIM ID: 0147
User Action:
Information only; no action is required
FQXSPMA2024I: Sensor [SensorElementName] has deasserted.
This message is for the use case when an implementation has detected a Sensor has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Memory
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0509
User Action:
Information only; no action is required
FQXSPNM4000I: Management Controller [arg1] Network Initialization Complete.
This message is for the use case where a Management Controller network has completed initialization.
Severity: Info
Serviceable: No
60
ThinkSystem SR950 V3 Messages and Codes Reference

Other manuals for Lenovo ThinkSystem SR950 V3

Related product manuals