Need help?Do you have a question about the Lenovo ThinkSystem SR950 7X12 and is the answer not in the manual?
General| Product Type | Server |
|---|---|
| Processor | Up to four Intel Xeon Scalable processors |
| RAID Support | RAID 0, 1, 5, 6, 10, 50, 60 |
| Management | Lenovo XClarity Controller |
| Memory | Up to 12TB |
| Drive Bays | Up to 24x 2.5-inch bays |
| Power Supply | 2000W or 1600W Platinum redundant power supplies |
| Network Interface | 1Gb/10Gb/25Gb/100Gb Ethernet |
| Operating System Support | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware |
Details of items included in the server shipment and an overview of its key capabilities and technologies.
Technical details, physical attributes, and available management interfaces and tools for the server.
Information for server identification, QR code access, network label, front panel controls, LEDs, and drive status.
Description of rear components, cable connection guidelines, and routing instructions for common and drive cables.
Identification of available server components for ordering and details on available power cord options.
Tasks for server setup, general installation recommendations, and precautions for handling sensitive components.
Procedures for installing compute system boards, CPUs, memory, drives, adapters, and power supplies.
Steps for installing the server in a rack, connecting cables, powering on, validating, and powering off.
Configuring network settings for accessing the Lenovo XClarity Controller for server management.
Options and procedures for updating and configuring server firmware settings.
Details on memory configuration, RAID setup, operating system installation, and server configuration backup.
Information on internal connectors, system boards, I/O trays, and general component access.
Procedures for replacing adapters, risers, compute trays, system boards, and fan cages.
Procedures for replacing hard drives, backplanes, fillers, and the I/O tray.
Procedures for replacing M.2 backplanes/drives, memory modules/air baffles, and riser brackets.
Procedures for replacing storage interposers and storage trays.
To Next Page