When you navigate through the hierarchy of the menu options, the LCD display panel shows information for
that option with the up and down arrows. At the bottom of the hierarchy, only the up arrow is left, while at the
top of the hierarchy, only the down arrow is left.
For the errors submenu set, when only one error occurs, the LCD display panel displays that error. When
more than one error occurs, the LCD display panel displays the number of errors that have occurred. If no
errors occur, the no error menu will be available for navigation.
To move within the menu options, use the Scroll up or Scroll down buttons, then the Select button to enter
a submenu set.
The LCD system information display panel displays the following types of information about the server:
• Lenovo XClarity Controller (LXCC) system error log
Note: The Scroll Down button will only function for this menu option when errors occur. A list of current
errors reported by the system will be displayed.
• System VPD information
– Machine type and serial number
– Universal Unique Identifier (UUID) string
• System firmware levels:
– UEFI code level
– LXCC code level
• LXCC network information:
– LXCC hostname
– LXCC dedicated MAC address
Note: Only the MAC address that is currently in use is displayed (dedicated or shared).
– LXCC shared MAC address
– IP v4 information
• System environmental information:
– Ambient temperature
– Processor temperature
– AC input voltage
– Estimated power consumption
Rear view
The rear of the server provides access to several components, including the power supplies, PCIe adapters,
serial port, and Ethernet ports.
Rear components
Figure 7 “Rear view of the server” on page 22 illustrates the rear view of the server.
Chapter 2. Server components 21
To Next Page
Loading...
