Lenovo ThinkVision L171 User Manual

Table 2-2. OSD functions (continued)
OSD Icon on Main Menu Submenu Description
Options Menu Position
Menu position adjusts menu
location on the screen.
Default Default returns the menu
position to the default settings.
Custom
v Horizontal: Changes the
horizontal position of the OSD.
v Vertical: Changes the vertical
position of the OSD.
v Save
Factory Reset
v Cancel
v Reset
Resets
monitor to the original
factory settings.
Accessibility Controls button and menu
settings for accessibility
preferences.
Button repeat rate:
Select or to change.
v Off
v Default
v Slow
Menu time out: Sets the
length of time the OSD will
remain active after the last time a
button is pressed.
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer
to your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and
the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is
currently configured to a display mode outside the range of this monitor, you may
need to re-attach the CRT monitor temporarily until you have re-configured the
system; preferably to 1280 x 1024 at 60 Hz, which is the Native Resolution Display
mode.
Chapter 2. Adjusting and using your monitor 2-5

Lenovo ThinkVision L171 Specifications

General

Pixel pitch	0.264 x 0.264 mm
Display diagonal	17 \
Display resolution	1280 x 1024 pixels
Vertical scan range	55 - 75 Hz
Horizontal scan range	30 - 83 kHz
Viewable size diagonal	432 mm
Viewable size, vertical	272 mm
Viewing angle, vertical	135 °
Contrast ratio (typical)	700:1
Viewable size, horizontal	340 mm
Viewing angle, horizontal	140 °
Display brightness (typical)	300 cd/m²
Windows operating systems supported	Windows 2000
Certification	MPR-II, TCO-99, MPR-III
Product color	Black
Market positioning	Business
Cable lock slot	Yes
Tilt angle range	-4 - 30 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Power requirements	100 - 240 VAC, 50 - 60 Hz
Power consumption (off)	1 W
Power consumption (standby)	2 W
Power consumption (typical)	28 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	163 mm
Width (with stand)	371 mm
Height (with stand)	386 mm
Weight (without stand)	5000 g