What to do if my Lenovo Monitor power indicator is not lit and there is no image?
If the power indicator isn't lit and there's no image on your Lenovo monitor, ensure the power cord is properly connected and the outlet has power. Also, verify that the monitor is powered on. Try using a different power cord or electrical outlet to rule out those issues.
Why is my Lenovo Monitor power indicator amber, but there is no image?
If your Lenovo monitor's power indicator is amber but there's no image, ensure the video cable is properly connected to the system. Also, check the monitor's brightness and contrast settings in the OSD menu and adjust them if they are at the lowest setting.
What to do if Lenovo Monitor screen is blank and power indicator is amber?
If your Lenovo monitor screen is blank and the power indicator is amber, the monitor is likely in Standby/Suspend mode. Press any key on the keyboard or move the mouse to restore operation. You may also want to check the Power options settings on your computer.
How to fix unacceptable image quality on Lenovo Monitor?
If your Lenovo monitor's image quality is unacceptable, ensure the video signal cable is firmly plugged into both the system and the monitor. You may also want to select a different color setting from the OSD menu and perform automatic image setup.
How to resolve fuzzy lines or blurry image on Lenovo ThinkVision P25i-30 Monitor?
To resolve fuzzy lines or a blurry image on your Lenovo monitor, adjust the resolution settings on your system to match the native resolution for this monitor: 1920 x 1080 at 60 Hz. Also, perform automatic image setup; if that doesn't help, perform manual image setup. When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system.
How to fix “Out of Range” message on Lenovo ThinkVision P25i-30 Monitor?
If the words “Out of Range” are displayed on your Lenovo monitor and the power indicator is flashing white, the system is set to a display mode not supported by the monitor. If replacing an old monitor, reconnect it and adjust the display mode to within the specified range for your new monitor. If using a Windows system, restart the system in safe mode, then select a supported display mode for your computer. If these options do not work, contact the Customer Support Centre.
Why do some pixels appear discolored on my Lenovo ThinkVision P25i-30?
If one or more pixels appear discolored on your Lenovo monitor, this is a characteristic of the LCD technology and is not an LCD defect. If there are more than five pixels missing, contact the Support Center.
To Next Page
General