What to do if my Lenovo ThinkVision P40w-20 power indicator is not lit?
If your Lenovo Monitor's power indicator isn't lit and there's no image, check the following: * Ensure the monitor's power switch is turned on. * Make sure the power cord is properly connected to both the monitor and the outlet. * Verify that the outlet has power. You can also try another power cord or electrical outlet to rule out issues with the original cord or outlet.
Why is my Lenovo Monitor screen blank with amber light?
If your Lenovo Monitor screen is blank and the power indicator is steady amber or flashing white, it could be in Standby/Suspend mode. Try pressing any key on the keyboard or moving the mouse to restore operation. You may also need to check the Power options settings on your computer.
How to improve image quality on Lenovo ThinkVision P40w-20 Monitor?
If the image quality on your Lenovo Monitor is unacceptable, ensure that the video signal cable is firmly plugged into both the system and the monitor. You may also want to select another color setting from the monitor's OSD menu.
How to fix blurry image on Lenovo ThinkVision P40w-20?
If you see fuzzy lines in text or a blurry image with horizontal or vertical lines on your Lenovo Monitor, your system Display Properties setting have not been optimized. Adjust the resolution settings on your system to match the native resolution for this monitor: 5120 x 2160 at 60 Hz. When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system.
Why is my Lenovo ThinkVision P40w-20 Monitor power indicator white but no image?
If your Lenovo Monitor's power indicator is white but there is no image on the screen, ensure the video signal cable is properly connected to both the system and the monitor. Also, check the monitor's brightness and contrast settings in the OSD menu and adjust them if they are at the lowest setting.
What to do if Lenovo Monitor says 'Out of Range'?
If your Lenovo Monitor displays “Out of Range” and the power indicator is flashing white, it means the system is set to a display mode not supported by the monitor. If you replaced an old monitor, reconnect it and adjust the display mode to within the specified range for your new monitor. If using a Windows system, restart the system in safe mode, then select a supported display mode for your computer. If these options do not work, contact the Customer Support Centre.
Why is my Lenovo monitor screen blank with amber light after connecting?
If the screen of your Lenovo Monitor is blank and the power indicator is steady amber or flashing white, and you are connecting via DP (or Thunderbolt) or HDMI, the PC may not fully support the connection. Change DP version from 1.4 to 1.2 in OSD if connecting DP (or Thunderbolt) port; Change HDMI version from 2.0 to 1.4 in OSD if connecting HDMI port.
Why does my Lenovo ThinkVision P40w-20 have discolored pixels?
The appearance of one or more discolored pixels is a characteristic of LCD technology and not necessarily a defect. If there are more than five pixels missing, contact the Customer Support Centre.
What to do if Lenovo Monitor eKVM causes right-click on left click?
When using eKVM, if the Windows system responds with a right-click action when you click the left mouse button, it is due to a Windows system limitation. To recover, click the right button in Windows when the problem happens.
Why doesn't my wireless mouse work with Lenovo Monitor eKVM on MacOS?
Some multifunction mouse execute extra keypad action when pressing eKVM hotkey in MacOS, which causes this function can not be active. Change to wired USB mouse, or non-multifunction mouse.
General| HD type | 2K Ultra HD |
|---|---|
| Color gamut | 99 % |
| Backlight type | W-LED |
| Display diagonal | 39.7 \ |
| Anti-glare screen | Yes |
| Display resolution | 5120 x 2160 pixels |
| Display technology | LCD |
| Native aspect ratio | 21:9 |
| Maximum refresh rate | 75 Hz |
| Contrast ratio (typical) | 1000:1 |
| Display number of colors | 1.07 billion colors |
| Display brightness (peak) | 300 cd/m² |
| USB hub version | 3.2 Gen 1 (3.1 Gen 1) |
| DisplayPort version | 1.4 |
| Headphone connectivity | 3.5 mm |
| USB Type-A downstream ports quantity | 4 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 250 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 66 W |
| Cable lock slot type | Kensington |
| Panel mounting interface | 100 x 100, 200 x 100 mm |
| Color name | Raven Black |
| Product color | Black |
| Market positioning | Gaming |
| Sustainability certificates | EPEAT Gold, RoHS |
Weight and Dimensions| Depth (with stand) | 279.4 mm |
|---|---|
| Width (with stand) | 947.6 mm |
| Height (with stand) | 641.2 mm |
| Weight (with stand) | 20000 g |
| Depth (without stand) | 100.8 mm |
| Height (without stand) | 428.7 mm |
| Weight (without stand) | 14600 g |
Lists items included in the product package.
Guides on connecting and turning on the monitor, listing input connectors.
Explains the Picture-by-Picture function for displaying two video sources simultaneously.
Describes the Picture-in-Picture function to display two video sources.
Details how to connect multiple monitors in a daisy chain configuration using Thunderbolt.
Explains the True Split feature for creating two independent displays using one cable.
Introduces the Built-In KVM Switch for operating two PCs with one keyboard/mouse.
Provides recommended resolution settings for optimal PC experience.
Lists the detailed technical specifications and features of the monitor.
Describes direct access controls available when the OSD is not displayed.
Explains how to navigate and use the On-Screen Display (OSD) menus.
Lists the factory set display modes and their resolutions and refresh rates.
Provides step-by-step instructions for installing the monitor driver in Windows 10.
Provides general tips for safe usage of the computer and monitor.
To Next Page