Before first use:
Before using for the first time, boil fresh water at least twice in the appliance. Use
only cold water without any additives or ingredients.
Using the appliance:
1) Connect the base of the kettle into a 240V mains power socket.
2) When the base of the kettle is plugged in and switched on, it will beep
twice, and the screen will be on.
3) If there is no glass kettle on the base, the display on the screen will read
E1. When the display reads E1, no buttons will work.
4) Fill the kettle with cold fresh tap water. Ensure the kettle is filled over the
minimum level and under the maximum level, and the lid is securely
placed back on.
5) Put the glass kettle onto the base. The screen display on the base will be
on and will show the temperature of the water inside the glass kettle.
Operation:
ON/OFF
1) Press the ON/OFF button to begin heating the water in the glass kettle.
2) Press the ON/OFF button again to stop heating the water in the glass
kettle.
3) When the glass kettle is heating the water, the blue indicator light will
illuminate.
4) When the glass kettle is not heating the water, the blue indicator light will
not illuminate.
5) The default temperature to boil the water is set to 100°C.
To Next Page
Loading...