34 Information LE1835
50
Bit
Settings 2
1 (0) Not used 1
2 (1) 0 Speed-dependent braking delay 0
1 Speed-independent braking delay
3 (2)
1 Braking with DC if CV 29 Bit 3 = 0
0
4 (3) 0 EMF switch inactive
1 EMF switch active
5-8 (4-7)
Not used
0
51
Bit
Settings of function outputs A and B
1 (0) 0 Function outputs A and B act direction-dependently
1 Function output A reacts to F0, function output B reacts to F1
0
2 (1)
Dimming of function output A only effective if Bit 3 is set
0
0 Function output A is always dimmed if Bit 3 is set
1 and Bit 1=0: Dimming with F1 on/off
1 and Bit 1=1: Dimming with F4 on/off
3 (2)
1 Function output A is can be dimmed
0
4 (3)
1 Function output B is can be dimmed
0
5-8 (4-7)
Not used
0
52
0-255 Dimming value for function outputs A and B:
0 is off, 255 is maximum brightness.
64
53
1-255
control parameter for EMF
8
54
1-255 Mapping the function output C:
Bits 1 to 8 correspond to functions F1 to F8.
F1, Bit 1
set
To Next Page
Loading...
