Need help?Do you have a question about the Lenz DIGITAL plus LZ100 and is the answer not in the manual?
Explains display elements and their meanings for locomotive control.
Describes the new stack feature for managing up to 12 locomotive addresses.
Details how to activate/deactivate locomotive decoder functions using keys 0-9.
Explains how to navigate and select between function groups 1, 2, and 3.
Sets locomotive decoder functions (F1-F12) to temporary or continuous operation.
Defines 'refreshing' as cyclic function information transmission to decoders.
Guides on how to view and set the speed-step mode for locomotives.
Details extended CV programming (1-1024) and value manipulation on the programming track.
Covers fast CV value changes and reading CVs via PoM using the LRC120.
General| Manufacturer | Lenz |
|---|---|
| Category | Controller |
| DCC Output Current | 5A |
| DCC Format | NMRA DCC |
| Output Current | 5A |
| Number of Outputs | 1 |
| DCC Compatibility | NMRA DCC |
To Next Page
