4 Update LZ100 / LZV100 and LH100 to Version 3.6
2.1.1 Examples for the most important displays:
13 8
The single locomotive (L) with address
0003 is controlled.
The display of function group 1 is
selected; functions 0, 1, 3 and 8 are
activated.
34 8
The locomotive with address 1234 is in
multiple-traction operation (m).
The display of function group 2 is
selected; functions 10, 19, 13, 14 and 18
are activated.
The multiple traction with address 0033 is
controlled.
When the multiple-traction address is
displayed, no functions are displayed.
2.2 The expanded stack
Up to version 3 it was possible to change between two locomotive
addresses with the 'Esc' key of the LH100. With version 3.6 it is now
possible to scroll through a stack of up to 12 locomotive addresses
with the 'Esc' key. This is comparable to an index card box with 12
index cards. You can place any locomotive address in any stack slot.
Ex-works, locomotive addresses 1 to 12 are placed in this stack.
2.2.1 Scrolling through the stack
Each time the LH100 is turned on,
stack slot 1 is displayed. Ex-works,
this slot is occupied by locomotive
address 1.
Press 'Esc' to display the next stack
slot.
To Next Page
Loading...
Need help?
General
