PC system bus adapter 2173 / 2177
L
2 PC system bus adapter EN 1.1
1 Preface and general information
The PC system bus adapter is a communication module f or data transfer between a target system
(drive controller, Drive PLC, e tc.) and a PC via the syst em bus (CAN). Two types are available:
• The PC system bus adap ter 2173 is the classic type. It is connected to t he parallel interface
(LPT port/printer connection) of the PC or notebook.
• The PC system bus adap ter 2177 can be used for PCs & notebooks with a USB port (Universal
Serial Bus).
This type is recommended for notebooks which do not have a parallel interface for printer
connection.
Note!
This Manual contains information
• about the software ins tallation of the device drivers required for the PC system bus adapters
and
• the software configu ration of the PC system bus adapters using the system bus
configuration tool from Lenze.
Information about the mechanical/electrical connection of the PC system bus adapters can be found
in the corresponding Mounting Instructions for the PC system bus adapters.
1.1 Conventions used
This Manual uses the following conventions to distinguish between different types of information:
Type of information Marking Example
Names of dialog boxes, input fields
and selection lists
italics The dialog box Options
Buttons bold Click Ok to...
Menu commands bold Use the command Copy you can...
If several commands must be used in sequence
to carry out a function, then the individual com-
mands are separat ed by an arrow:
Select File
WOpen to...
Keyboard commands <bold> Use <F1> to open the online help.
If a command r equires a combination of keys,
the commands are linked with ”+”:
Use <Shift>+<ESC> to ...
To Next Page
Loading...