PC system bus adapter 2173 / 2177
L
7PC system bus adapter EN 1.1
5 Software configuration
The system bus adapter has to be configured to allow communication of the Lenze tools via the system
bus adapter.
Select Programs
WLenzeWCommunicationWSystem bus configuration tool in the start menu to
open the system bus configuration tool:
Under ”Hardware Name” you will find a list of all system bus adapters installed. The status of the
individual system bus adapters is indicated under ”State”:
Symbol Meaning
The system bus adapter is active and used by Lenze tools.
The system bus adapter is active and used by Lenze tools. It is defined as a standard.
• Lenze tools which can only access one system bus adapter use the standard system bus adapter.
• Lenze tools which can access mor e than one system bus adapter at the same time can use all
active system bus adapters.
The system bus adapter is inactive and not used by Lenze tools.
The system bus adapter could not be accessed without error.
• For mor e infor mation see FAQ (Frequently Asked Questions) in the appendix. ^ 14
To Next Page
Loading...