Handhabung
•
Das Produkt niemals trotz erkennbarer Schäden in Betrieb nehmen.
•
Das Produkt niemals technisch verändern.
•
Das Produkt niemals unvollständig monert in Betrieb nehmen.
•
Das Produkt niemals ohne erforderliche Abdeckungen betreiben.
•
Alle elektrischen Verbindungen nur im spannungslosen Zustand herstellen, trennen und verändern!
WARNUNG!
Field Wiring Markings
Wiring terminal: Voltage supply [24 V DC ± 25 % ]
▶
Use 75 °C copper wire only.
▶
AWG 22 ... 14 (0.5 ... 2.5 mm
2
), for UL 508A min. AWG 14 (2.5 mm
2
)
▶
Torque 5 ... 7 lb−in (0.5 ... 0.6 Nm)
WARNUNG!
Device
▶
For use in a polluon degree 2.
▶
This device is classied as ’Open Equipment’, intended for installaon inside control cabinets/panels or
machine enclosures (indoor use, altude up to 3000 m, min. surrounding air temperature 0 °C).
▶
Use PELV or SELV power supply.
▶
Use this device only in the manner described in this manual. If the equipment is used in a manner not
specied by the manufacturer, the protecon provided by the equipment may be impaired.
Sicherheitshinweise
Handhabung
6
To Next Page
Loading...
Need help?
General
