Parameter setting
With communication module LECOM−A (RS232)
6−15
L
EDB82MV752 EN 5.2
Code ImportantParameter
No. Settings/optionsLECOM
format
Designation
C1962 Extended error
no.
0 No error
1 Invalid service identification
Internal error
2 Invalid call identification
3
Invalid data type
User error in the host
4 Invalid subcode number
5
Invalid code number
6
Invalid parameter − general
7
Operating status, e. g. controller inhibit
Access error
8 Operating mode C0001 wrong
9
Parameter can only be read
10
General
11
Data block length too long
Limit violation
12 Collision with other parameter values
13
Leave value range
14
General limit violation
17
General internal error Internal error
32 General
Communication error − communication module controller
33 Time−out
34
Frame error
35
Parity error
36
Overflow
37
Handshake
38
Block memory overflow
208
Frame error
Communication error − controller communication module
209 Overflow error
210
Checksum error in the communication
module
211 Telegram interruption
212
Invalid data
213
Invalid service
214
Parity error
To Next Page
Loading...