Lenze E82EV752K4C - User Manual

Frequency inverter
8200 vector
0.25...90.0 kW
Lenze
Global Drive
Manual
Show/Hide Bookmarks

Lenze E82EV752K4C Specifications

General

Brand	Lenze
Model	E82EV752K4C
Category	DC Drives
Language	English

Summary

Preface

1.2 The 8200 vector frequency inverter

Provides an overview of the 8200 vector frequency inverter's function, system, and additional features.

1.4 Legal regulations

Safety information

3.2 Safety and application notes for Lenze controllers

Provides essential safety and application guidelines for Lenze controllers.

3.3 General safety and application notes for Lenze motors

Outlines general safety precautions and application notes for Lenze motors.

3.4 Residual hazards

Identifies potential hazards and risks associated with the product's operation and handling.

Technical data

4.2 General data;application conditions

4.3 Operation with rated power (normal operation)

Details the rated data for normal operation across different mains voltages and power ranges.

4.4 Operation with increased rated power

Provides rated data for operating the controller with increased power capacity.

Basic device installation

5.2 Important notes

Provides crucial notes and considerations before installing the basic device.

5.3 Basic units in the power range 0.25... 2.2 kW

Details installation methods for basic units within the 0.25 to 2.2 kW power range.

5.4 Basic units in the power range 3... 11 kW

Details installation methods for basic units within the 3 to 11 kW power range.

5.5 Basic units in the power range 15... 30 kW

Details installation methods for basic units within the 15 to 30 kW power range.

5.6 Basic units in the power range 45... 55 kW

Details installation methods for basic units within the 45 to 55 kW power range.

5.7 Basic units in the power range 75... 90 kW

Details installation methods for basic units within the 75 to 90 kW power range.

Basic unit wiring

6.2 Important notes

Provides essential notes and safety information related to basic unit wiring.

6.3 Basics for wiring according to EMC

Explains the fundamental principles and requirements for wiring to ensure EMC compliance.

6.4 Basic units in the power range 0.25... 2.2 kW

Details wiring procedures for basic units in the 0.25 to 2.2 kW power range.

6.5 Basic units in the power range 3... 11 kW

Details wiring procedures for basic units in the 3 to 11 kW power range.

6.6 Basic units in the power range 15... 30 kW

6.7 Basic units in the power range 45... 55 kW

6.8 Basic units in the power range 75... 90 kW

Commissioning

8.2 Before switching on

Provides essential checks and notes to perform before powering on the controller.

8.3 Selection of the control mode

8.4 Parameter setting with the E82 ZBC keypad

Guides through parameter setting using the E82ZBC keypad for V/f and Vector control.

8.5 Parameter setting with the XT EMZ9371 BC keypad

Guides through parameter setting using the XT EMZ9371BC keypad for V/f and Vector control.

8.6 Important codes for quick commissioning

Parameter setting

9.3 Parameter setting with the E82 ZBC keypad

Details general data, installation, display elements, and parameter functions for E82ZBC keypad.

9.4 Parameter setting with the XT EMZ9371 BC keypad

Details general data, installation, display elements, and parameter functions for XT EMZ9371BC keypad.

Function library

10.3 Operating mode

Explains different operating modes like V/f, Vector, and Sensorless Torque control.

10.4 Optimising the operating behaviour

10.5 Behaviour in the event of mains switching, mains failure or controller inhibit

Details how the controller behaves during mains interruptions or controller inhibit events.

10.6 Limit value setting

10.7 Acceleration, deceleration, braking, stopping

Explains setting acceleration, deceleration times, S-shaped ramps, quick stop, and braking operations.

10.8 Configuration of analog and digital setpoints and actual values

Details configuration of analog inputs, outputs, digital setpoints, and actual values.

10.9 Automatic detection of motor data

Explains the function for automatically detecting motor data for optimal performance.

10.10 Process controller

10.14 Thermal motor monitoring

10.15 External fault evaluation

10.17 Parameter set management

Troubleshooting and fault elimination

11.2 Troubleshooting

11.3 Drive performance in case of errors

11.4 Error elimination

Provides guidance on eliminating maloperations and resolving error messages.

11.5 Resetting error messages

Network of several drives

12.4 Conditions for a trouble-free network of several drives

Details conditions for reliable network operation, including mains connection, DC-bus, and protection.

12.5 Selection

12.8 Braking operation in a drive system

Braking operation

13.3 Braking operation with three-phase AC brake motor

13.4 Braking operation with external brake resistor

Covers braking operation using external brake resistors for 8200 vector units.

Application examples

15.2 Pressure control

15.4 Dancer position control (linear drive)

15.5 Speed control

15.6 Group drive (operation with several motors)

15.8 Setpoint summation (basic and additional load operation)

15.9 Power control (torque limitation)

Signal-flow charts

16.3 Overview of signal processing

16.4 Signal processing in the function blocks