Need help?Do you have a question about the Lenze E82EV552K4C and is the answer not in the manual?
Provides essential safety and application guidelines for installing and operating Lenze controllers.
Outlines safety precautions and application guidelines specific to Lenze motors.
Highlights potential residual hazards associated with the controller and motor operation.
Details the rated data for controllers operating at specified power levels under normal conditions.
Details installation for basic units within the 0.25 to 2.2 kW power range, covering various mounting types.
Covers installation procedures for basic units in the 3 to 11 kW power range, including different mounting options.
Provides installation instructions for basic units in the 15 to 30 kW power range, with various mounting configurations.
Details installation for basic units in the 45 to 55 kW power range, covering different mounting methods.
Covers installation procedures for basic units in the 75 to 90 kW power range, including various mounting options.
Provides crucial safety notes and handling information for basic unit wiring.
Details essential requirements and techniques for wiring according to EMC standards.
Details common maloperations, their causes, and remedies for troubleshooting.
Outlines essential conditions for ensuring trouble-free operation of networks with multiple Lenze controllers.
Explains braking operations using external brake resistors for high inertia or generator mode loads.
Explains the different operating modes available for the controller, including V/f, Vector, and Sensorless Torque control.
Describes controller behavior during mains switching, failure, or inhibit conditions, including start conditions and deceleration.
Details the management of parameter sets, including saving, copying, and restoring configurations.
Provides essential checks and notes before applying mains voltage for commissioning.
Details general data, installation, and parameter setting steps using the E82ZBC keypad.
Provides guidance on general data, installation, and parameter setting using the XT EMZ9371BC keypad.
To Next Page
General